Standard Horizon QUEST+ GX1256S - Manual (Page 36)

GX1256S Page 36
key to move to next character.
7. Repeat step 6 as many times as necessary to complete
the Station Name (up to 12 characters).
8. Press and hold the [CALL/SET(MENU)] key to store the
Station Name and enable setting the MMSI ID code.
9. Press the [UP] or [DOWN] key to select the first digit of
the MMSI ID code, the press the [CALL/SET(MENU)]
key to move to next character.
10. Repeat step 9 as many times as necessary to complete
the MMSI ID code (9 digits).
11. Press and hold the [CALL/SET(MENU)] key to store the
MMSI ID code.
12. Press the [DOWN] key to select “EXIT,” then press the
[CALL/SET(MENU)] key.
13. Press the UP or [DOWN] key to select “EXIT,” then press
the [CALL/SET(MENU)] key to return to the normal op-
eration.
7.7.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually
respond to a DSC Individual call requesting you to switch to a working chan-
nel for voice communications. When Manual is selected the MMSI of the
calling vessel is shown allowing you to see who is calling. This function is
similar to caller id on a cellular phone.
1. Press and hold down the [CALL/SET(MENU)] key until “RADIO SETUP”
appears.
2. Press the[DOWN] key to select “DSC
SETUP.”
3. Press the [CALL/SET(MENU)] key, then
press the [UP] or [DOWN] key to select
“INDIVIDUAL REPLY.”
4. Press the [CALL/SET(MENU)] key to enable setting this
item.
5. Press the [UP] or [DOWN] key to select “AU (Automatic)”
or “oF (off).”
6. Press the [CALL/SET(MENU)] key to store the selected
setting.
7. Press the [UP] or [DOWN] key to select “EXIT,” then