Schumacher DY-1420 User Manual

Page 8

Advertising
background image

7

CALCULATING CHARGE TIME

12.

Find your battery’s rating on the chart below, and note the charge time given for each

charger setting. The times given are for batteries with a 50% charge prior to recharging.

Add more time for severely discharged batteries.
NR means that the charger setting is NOT RECOMMENDED.

BATTERY SIZE/RATING

CHARGE RATE/CHARGING TIME

2 AMP

20 AMP

55 AMP

SMALL

BATTERIES

Motorcycle,

garden,

tractor, etc.

6 - 12 AH

2 – 3¾ hrs

NR

NR

12 - 32 AH

3¾ – 10 hrs

NR

NR

CARS/TRUCKS

200 - 315 CCA

40 - 60 RC

11¼ – 14½

hrs

1 – 1½ hrs 25 - 32 min

315 - 550 CCA

60 - 85 RC

NR

1½ – 2 hrs 32 - 40 min

550 - 1000 CCA 80 - 190 RC

NR

2 – 3½ hrs 40 - 76 min

MARINE/DEEP CYCLE

80 RC

NR

1¾ hrs

NR

140 RC

NR

2¾ hrs

NR

160 RC

NR

3 hrs

NR

180 RC

NR

3¼ hrs

NR

MAINTENANCE INSTRUCTIONS

13.

After use and before performing maintenance, unplug and disconnect the battery

13.1

charger (see sections 6, 7 and 8).
Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery clips,

13.2

cords, and the charger case.
Ensure that all of the charger components are in place and in good working condition,

13.3

for example, the plastic boots on the battery clips.
Servicing does not require opening the unit, as there are no user-serviceable parts inside.

13.4

All other servicing should be performed by qualified service personal.

13.5

MOVING AND STORAGE INSTRUCTIONS

14.

Store the charger unplugged, in an upright position. The cord will still conduct electricity

14.1

until it is unplugged from the outlet.
Store inside, in a cool, dry place.

14.2

Do not store the clips on the handle, clipped together, on or around metal, or clipped to

14.3

the cables.
If the charger is moved around the shop or transported to another location, take care to

14.4

avoid/prevent damage to the cords, clips and charger. Failure to do so could result in

personal injury or property damage.
TROUBLESHOOTING

15.

PROBLEM

POSSIBLE CAUSE

REASON/SOLUTION

Charger will not turn on when

properly connected.

AC outlet is dead.

Poor electrical connection.

Check for open fuse or circuit

breaker supplying AC outlet.
Check power cord and

extension cord for loose

fitting plug.

The battery is connected and

the charger is on, but is not

charging.

Clips are not making a good

connection.

Check for poor connection at

battery and frame. Make sure

connecting points are clean.

Rock clips back and forth for

a better connection.

Advertising