Sound Performance Lab Model 2601 - Manual (Page 18)

18
Transducer
Setup 5
Stereo Effects Setup: Dry-Wet-Wet Setup with guitar box (Dry) and two stage monitors (Wet).
The dry guitar signal is routed from the Transducer Speaker Thru. Connect the Transducer
Line Output to an effects machine. The effects machine‘s wet outputs (Right/Left) are then
connected as needed to powered monitors. The guitarst gets a simple stereo effects (Dry-
Wet-Wet setup) signal on stage. The second Transducer Line Output may, for example, be
routed for P. A. use.
Setup 6
Stereo Effects Setup: Dry-Wet-Wet setup for three powered monitors without cabinet.
The dry guitar signal derives from Line Ouput 1, which is routed to an active monitor. Connect
the Transducer Line Output 2 with an effects machine and route each of it‘s wet outputs (L/R)
to an active monitor. The guitarist gets a simple stereo effect Dry-Wet-Wet setup on stage.
Setup Examples
4FUVQ

1PXFS
*OQVU 4QFBLFS
5ISV
4QFBLFS
0VU
%S
Z
'9

X
FU

MFGU
'9

X
FU

SJHIU
'9
1SPDFTTPS
"DUJWF
.POJUPS
"DUJWF
.POJUPS
E#
-JOF
0VUQVU

4FUVQ

1PXFS
*OQVU -JOF
0VUQVU
 -JOF
0VUQVU

4QFBLFS
0VU
%S
Z
'9
XFU
MFGU '9
XFU
SJHIU
"DUJWF
.POJUPS
"DUJWF
.POJUPS
'9
1SPDFTTPS
"DUJWF
.POJUPS
Live: Stereo Effect/Dry-Wet-Wet