Sony BRC-Z700 - Manual (Page 33)

Ad
jus
ting an
d
S
e
tti
ng Wit
h
Men
u
s
PICTURE Menu
33
R. GAIN, B. GAIN: When you select MANUAL, R.
GAIN (red gain) and B. GAIN (blue gain) appear.
You can adjust the white balance manually within
the range between –128 and +127.
COLOR GAIN
Adjusts the color intensity of the picture. The adjustable
range is from –7 to +7. The color intensity increases in
the + direction, and decreases in the – direction.
COLOR MATRIX
Enhances or reduces a specific color region without
changing the white balance focusing point.
ON PAGE1: When this item is selected, R.ENHANCE,
G.ENHANCE and B.ENHANCE appear. You can
adjust the red, green and blue color regions with
each item within the range between –10 and +10.
ON PAGE2: When this item is selected,
YL.ENHANCE, CY.ENHANCE and
MG.ENHANCE appear. You can adjust the yellow,
cyan and magenta color regions with each item
within the range between –10 and +10.
OFF: COLOR MATRIX does not function.
PICTURE Menu
The PICTURE menu is used to adjust the picture quality.
DETAIL
Select the image enhancer level.
The adjustable level is in the range of 0 to 15. The larger
the setting level, the sharper the image outline. You can
obtain the softest image outline by selecting level 0.
COLOR DETAIL
Reduces the image enhancer of a specific color.
NARROW: The region of the color specified with
PHASE becomes narrow.
STD: The region of the color specified with PHASE is
that between NARROW and WIDE.
WIDE: The region of the color specified with PHASE
becomes wide.
CHECK: The region of the color specified with PHASE
is displayed in white. The region is set to STD when
CHECK is selected.
OFF: COLOR DETAIL does not function.
When an item other than OFF is selected, PHASE is
displayed and you can specify the color whose image
enhancer you want to reduce. The adjustable range is
from 0 to 71.
To set the COLOR DETAIL
1
Set COLOR DETAIL to CHECK.
2
Select PHASE to adjust so that the color region in
which you want to reduce the image enhancer is
displayed in white.
3
Set COLOR DETAIL to NARROW, STD or WIDE.
Note
You cannot store the status when CHECK is selected in
the preset memory of the camera.
<PICTURE>
>DETAIL
COLOR DETAIL
PHASE
GAMMA
FLICKER CANCEL
STEADY SHOT
B&W
COLOR BAR
7
STD
1
NORMAL
OFF
STANDARD
OFF
OFF