Sanyo AVL-209 - Manual (Page 12)

Connections
Connect a VCR
Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.
Note:
For better video, you can use the S-video jack if your source supports it.
The unit automatically identifies S-Video if you are using S-Video jack. We recommend you to disconnect S-Video
cable before you use Video jack.
How to connect:
1. Turn on your LCD TV, press SOURCE button repeatedly to select Video.
2. Turn on your VCR , insert a videotape and press the Play button.
To play VCR
Cautions Before Connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into
their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off on the panel to avoid any issues.
VCR
Yellow (VIDEO)
White (AUDIO L)
Red (AUDIO R )
W W
YY
RR
R L VIDEO AUDIO
- S VIDEO
ANT IN
ANT OUT AV IN
Rear of the VCR
10
Video
cable
Audio
cable
YY
WW
RR
YY W W RR
Input Source
Source-switch
Video
S-Video
cable
AV OUT
or
R L VIDEO AUDIO