Sanyo AVL-209 - Manual (Page 17)

Memorizing the Channels
Selecting the Signal Source
Your LCD TV can memorize and store all the available channels for both antenna and cable channels. After the
available channels are memorized, use CH+/- to scan the channels.
Press MENU to display the menu main page.
1
Before your LCD TV can memorize the available channels, you must specify the type of signal source that is
connected to the unit. (i.e., an antenna or cable system)
Press CH+ repeatedly to select Channel page. /-
2
Press ENTER or VOL+/- to access the submenu.
3
Press ENTER or VOL+/- to toggle between Antenna or Cable.
5
If you are connected to an antenna, please select Antenna. If you
connect cable, please select Cable.
Storing Channels in Memory Automatically
Press ENTER or VOL+/- to store channels in memory automatically.
The unit will begin memorizing all the available channels. During the process
of the Auto Search, you can press Menu to exit.
1
2
15
Cable
Channel
Auto Searching
Move Select Menu to exit
On Off
Cable Source
Channel Skip
Fine Tune
AFC
Frequency 55.25 MHz
Channel
Auto Searching
Move Select Menu to exit
On Off
Source
Channel Skip
Fine Tune
AFC
Frequency 55.25 MHz
Press CH+ to select . /- Source item
4
Auto Searching
CH No 11
Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
The Auto Searching item will be highlighted automatically.
Press ENTER or VOL+/- to select On or Off.
3
Press CH+ repeatedly to select AFC item. /-
2
When the AFC is set to On, the unit will automatically tune the program
frequency to provide the best possible picture and sound.
Setting Auto Frequency Control (AFC)
1
Repeat steps 1~3 in [Selecting the Signal Source] to access Channel page.
Cable
Channel
Auto Searching
Move Select Menu to exit
On Off
Source
Channel Skip
Fine Tune
AFC
Frequency 55.25 MHz
On Off
On Off
On Off
Cable
Channel
Auto Searching
Move Select Menu to exit
On Off
Source
Channel Skip
Fine Tune
AFC
Frequency 55.25 MHz
On Off
Menu to exit