Sony DVP-NS530 - Manual (Page 23)

C:\Documents and
Settings\PC28\Desktop\3080594131 DVP-
NS530GB\SOURCE\01GB05GET-CEK.fm master page=right
DVP-NS530/730P
3-080-594-13(1)
23
H
o
o
kups
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver).
Note
After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” in Quick Setup (page 24). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “MPEG” to “MPEG” (page
67). Otherwise, no sound or a loud noise will come
from the speakers.
D
PCM/DTS/MPEG/ DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT S VIDEO OUT
CR Y
COMPONENT VIDEO OUT
CB
LINE OUT
VIDEO R-AUDIO-L
D
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
Subwoofer Centre
Coaxial digital cord
(not supplied) Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
CD/DVD player
l : Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital input
to DIGITAL OUT
(COAXIAL or OPTICAL)
01GB01COV.book Page 23 Wednesday, April 27, 2005 11:37 AM