Sony TC-WE835S - Manual (Page 15)

Advanced Recording Operations
15
Recording the Same Source on
Both Decks (Simultaneous
Recording)
You can record the same source on cassettes in deck A
and B at the same time.
PAUSE P ª/·
ª/· DIRECTION MODE A+B REC
0
p
P
ª ·
)
U
§ §
R r P R r
0
p ª ·
)
•
1
Insert blank cassettes into both decks.
Make sure that record-protect tabs on the cassettes
have not been removed.
2
Select the Dolby NR (see page 7).
3
Select the side(s) to be recorded on.
To record on Set DIRECTION MODE to
Only one side A
Both sides a
4
Press A+B REC.
Both decks change to recording pause.
5
Start playing the program source.
6
Adjust the recording level manually, if necessary
(see page 7).
7
Select the side you want to start recording from
on both decks.
To record from Press
The front side ·
The reverse side ª
8
Press PAUSE P on deck B.
Simultaneous Recording starts.
To stop Simultaneous Recording
Press p on both decks.
z
The PAUSE P and REC MUTING R (see page 16)
buttons on deck B can control both decks at the
same time
During Simultaneous Recording, the PAUSE P and
REC MUTING R buttons on deck B control both decks,
but not the PAUSE P and REC MUTING R buttons on
deck A.
Recording Your Own Program
(RMS Dubbing)
You can record an RMS program that you’ve created
(see “Creating Your Own Program (RMS Play)” on
page 9). This function works only at normal speed.
PAUSE P
RMS/START HIGH/NORMAL
ª/·
0
p
P
ª ·
)
U
§ §
R r P R r
0
p ª ·
)
•
1
Insert a recorded cassette into deck A and a blank
cassette into deck B.
Make sure the record-protect tabs on the cassette in
deck B have not been removed.
2 Program tracks on deck A (see Steps 1 to 5 on
page 9).
3
Press HIGH/NORMAL once to change the tape
deck to dubbing standby.
4
Select the side of the tape in deck B you want to
record on.
To start recording Press
On the front side ·
On the reverse side ª
5
Press RMS/START or PAUSE P on deck B to start
RMS Dubbing.
To stop RMS Dubbing
Press p on deck B. The RMS program remains even
after RMS Dubbing stops.
z
To insert a blank space on the tape before you start
RMS Dubbing
You can insert a blank space of 4 seconds or more on the
tape in deck B by pressing the REC MUTING R button
after Step 4.
For details, see “Inserting a Blank Space During
Recording (Record Muting)” on page 16.
z
A blank of 10 seconds is automatically inserted on
the tape when you start RMS Dubbing if:
• you insert a new cassette into deck B.
• the tape in deck B is completely rewound to its
beginning and automatically stopped.