Sunbeam WD5810 User Manual
Page 8
• Before you start to style
your hair, comb through so
that there are no tangles.
• For best results, towel dry
hair. Do not use on dripping
wet hair.
• Plug in to a suitable supply
and switch on. The top
neon green light will come
on. This is the hottest
setting at 200 degrees.
• There is no need to pre heat
the styler. The styler will get
very hot very quickly so do
not touch with your fingers.
• Apply a styling lotion.
We recommend PPS
professional products.
• Beginning at the back,
use clips to section
the hair. Take a section
approximately 5cms wide
and comb or brush it
through. Working from
root to the ends, place the
section between the plates
and squeeze the handle
shut. Be careful not to
touch your skin.
• Hold the styler in place for
3 to 5 seconds depending
on your hair type (3
seconds for fine hair and
up to 5 seconds for thicker
hair).
• Once the hair is heated,
carefully slide the styler
along the direction of
separated hair making sure
that the hair is heated and
straightened all the way to
the ends.
Using your Wet to Dry
Straightener with Ionic
Technology
6