Spectra KT7002 - Manual (Page 10)

- 9 -
For Windows Users
Running PCCam for Creating Live Video Clips
1. Connect your Hello Kitty Digital Camera to your computer via the USB Cable.
2. Run the PCCam application.
Select the PCCam icon from the MyDsc2 program group on Windows Start Menu or double-click
the PCCam shortcut icon inside the MyDsc2 folder
on the Desktop.
To Preview a Scene
To preview your scene, click “Preview” under the
“Options” Title Bar.
To Adjust Resolution
There are 3 selectable resolutions: 160x120, 320x240 and 640x480
To adjust resolution, click the “Video Capture Pin” under the “Options” Title Bar.
To Adjust Frame Rate
To adjust frame rate (number of frame per second) and time limit (time to capture your video clip) of your
live video clip, click “Set Frame Rate” and “Set Time Limit” under “Capture” Title Bar.
Note:
The camera supports a maximum of 10fps at 640x480 resolution and 20fps for 320x240 and 160x120
resolutions.
Miscellaneous Settings
To set a default path and filename of your video clip, click “Set Capture File” under the “File” Title Bar.
e.g. To set default path and filename as C:\Documents and Settings\User\Desktop\MyVideo.avi
To adjust the video imaging properties, click “Video Capture Filter” under “Options” Title Bar.
To Capture Live Video
To start capturing, click “Start Capture” under the “Capture” Title Bar, then click “OK” for the pop-up
messenger.
To stop the video capture, click “Stop Capture” under the “Capture” Title Bar.
Title Bar
Preview Scene
Click “Use Frame Rate” to apply preset frame rate.
For example:
Set 10fps to capture 10 frames of video at every
second.
Click “Use Time Limit” to apply preset time limit.
For example:
Set 10s to capture 10 seconds of video.