Spectra KT7002 User Manual
Page 8
- 7 -
Functional Operation
Deleting a Single Image
In Normal Shot Mode, press
Mode/Power
button (#5) 7 times to choose Delete Single Image Mode. LCD
Display (#2) will show
(#2c).
Press
Shutter
button (#3) to delete the last image, the 3-Digit Icon (#2k) will count down by one when the
process is completed.
Deleting All Images
In Normal Shot Mode, press
Mode/Power
button (#5) 6 times to choose Delete All Images Mode. LCD
Display (#2) will show (#2d).
Press the
Shutter
button (#3) once, the 3-Digit Icon (#2k) will flash for 5 seconds. Press the
Shutter
button (#3) again within the 5 seconds to delete all the stored images in memory. The 3-Digit Icon (#2k)
will show
.
Image Resolution
There are 2 selectable image resolutions available: High ( ) or Low.(
)
In Normal Shot Mode, press
Mode/Power
button (#5) 8 times to choose Image Resolution Mode. LCD
Display (#2) will show
(#2j), and either
(#2a) or
(#2b) will flash to indicate the current
image resolution.
Press
Shutter
button (#3) again to select another resolution setting.
Image Compression
There are 2 selectable image compression methods: Compressed ( ) or Non-Compressed ( ).
In Normal Shot Mode, press
Mode/Power
button (#5) 9 times to choose the desired Image Compression
Mode. The LCD Display (#2) will show
(#2j), the 3-Digit Icon (#2k) will show either
or
, which
indicates the current image compression method.
Press the
Shutter
button (#3) again to select another image compression method.
Power Frequency
There are 2 power frequencies selectable: 50 or 60.
In Normal Shot Mode, press
Mode/Power
button (#5) 10 times to choose Power Frequency Mode. LCD
Display (#2) will show
(#2j), the 3-Digit Icon (#2k) will show either 50 or 60, which indicates the
current power frequency setting.
Press the
Shutter
button (#3) again to select a different power frequency setting.
Flash On/Off
In Normal Shot Mode, press
Mode/Power
button (#5) 2 times to choose Flash On/Off Mode. The 3-Digit
Icon (#2k) will show either
(Flash OFF) or
(Flash ON), which indicates the current Flash setting.
Press the
Shutter
button (#3) again to select another setting.
Note:
Flash (#10) will be turned OFF each time the camera is powered on. Turn it on manually whenever
necessary.
Please wait for the Flash Indicator (#4) to light before taking any photos requiring a Flash.
When the battery power becomes too low to charge the flash, the camera will automatically turn the
Flash (#10) OFF.
Flash Auto
In Normal Shot Mode, press
Mode/Power
button (#5) 11 times to choose Flash Auto Mode. The LCD
Display (#2) will show
(#2j), the 3-Digit Icon (#2k) will show either
(Flash forced on) or
(Flash auto), which indicates the current setting.
In Flash Forced On Mode, the Flash (#10) will flash every time pictures are taken. In Flash Auto Mode
the flash will only be on if the camera senses more light is needed in order to take the photo.
Press the
Shutter
button (#3) again to select another setting.
Note:
The Flash Indicator (#4) must be lit prior to taking photos in either setting for the Flash to work properly.