Programs and instructions – Schwinn 420 User Manual

Page 18

Advertising
background image

User Data and Memory Functionality

Your Elliptical Trainer can store up to 4 users and 10 workouts in the Console Memory.

Setting up a User Profile:

1. Push the USER DATA button to start User Profile mode.

2. Use the UP and DOWN buttons to set user from USER 1 to USER 4 (U1 to U4). Push the ENTER button to record

selection. The Display flashes "GENDER".

3. Use the UP and DOWN buttons to set your GENDER. The Console default equals MAN. Push the ENTER button to

record selection. The Display flashes "35".

4. Use the UP and DOWN buttons to set your AGE. The Console default equals 35. Push the ENTER button to record

selection. The Display flashes "5’07 (170)" and "HEIGHT".

5. Use the UP and DOWN buttons to set your HEIGHT. The Console default equals 5’07" (170cm). Push the ENTER

button to record selection. The Display flashes 155.0 (70.0) and "WEIGHT".

6. Use the UP and DOWN buttons to set your WEIGHT. The Console default equals 155.0 lbs (70 kg). Push the ENTER

button to record selection. The first segment on the Display flashes.

7. To input your name, use the UP and DOWN buttons to select a letter and push ENTER to set the letter. Your name

can take up to 14 segments total. Push ENTER for 2 seconds to record your name and exit the USER DATA mode.

If you do not want your name saved, hold the ENTER button for 2 seconds to exit the USER DATA mode and erase

all data.

Saving Your Exercise Data:

1. Push the MEMORY button after workout to save exercise data.

2. The Display shows "DATA SAVED". The computer saves the data to MEMORY 1 for that User Profile.

Note: The newest data always saves to the MEMORY 1 spot. MEMORY 10 keeps oldest exercise data.

3. Push USER DATA to exit MEMORY mode.

4. Push USER DATA again to exit USER DATA mode to the Program screen.

Reviewing Your Exercise Data:

1. Push the USER DATA button, and then push the MEMORY button.

2. Use the UP or DOWN buttons to review the data from MEMORY 1 to MEMORY 10.

3. Push USER DATA to exit MEMORY mode.

4. Push USER DATA again to exit USER DATA mode to the Program screen.

Programs and Instructions

Owner’s Manual

18

Advertising