Schwinn 420 - Manual (Page 21)

Troubleshooting
Advanced Post Assembly Troubleshooting
Problem
The below Solutions apply to the following issues:
• Console displays "E2" error code.
• Unit operates but Display does not show speed or RPM.
• Console shuts off (enters sleep mode) while in use.
Any of these situations might require advanced troubleshooting assistance. Follow the Solutions steps to make sure you
have no problems with wires and their connections. Call Customer Service if problems continue or you have other issues.
Solutions
a. Examine the console mast wire for damage. All wires should be intact. Contact Customer Service if you find any
damage.
b. Examine console mast wire connections at the Console and the base of Console Mast. Make sure connectors click
tightly together.
c. Contact Customer Service if problems continue.
Owner’s Manual
21