Outside calls, Making an outside call, Answering an outside call – Samsung ITP-5107SIP User Manual

Page 21: Universal answer

Advertising
background image

14

OUTSIDE CALLS

MAKING AN OUTSIDE CALL

•

Lift the handset and press an idle outside line button, line group button or dial
a line access code to receive dial tone—OR—press an idle outside line button,
line group button or dial a line access code to receive dial tone through the
speaker—OR—press SPEAKER, receive intercom dial tone and dial a line
access code.

•

Dial the telephone number.

•

Finish the call by replacing the handset.

NOTE: You will receive No More Calls tone when you attempt to make a call and
there is no button available for that line.

•

If Least Cost Routing is enabled on your phone system, this button may be
labeled LCR or accessed by dialing an access code (usually 9).

•

If your system is programmed to require an authorization code before making
a call, dial

✱ plus a valid code before selecting a C.O. line.

•

If your system is programmed to require an account code before making a
call, press the ACC button or dial 47 plus a valid bin number, press the ACC
button again and then select a C.O. line. See Account Codes for more information.

For more information on authorization and account codes, see your system
administrator.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before dialing.

ANSWERING AN OUTSIDE CALL

•

Lift the handset and you are automatically connected to the ringing call.
See Ring Preference under Customizing Your Keyset—OR—press the FLASHING
CALL
button to automatically answer on the speakerphone.

NOTE: If a call is flashing at your keyset but not ringing, you must press the flash-
ing button to answer.

UNIVERSAL ANSWER

Outside lines may be programmed to ring a general alerting device. To answer
calls ringing this device, dial 67 or press the UA button. This device can operate in
any one of the six different ring plans.

NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before dialing.

5107S_keyset.qxp 5/9/2006 9:56 AM Page 20

Advertising