Samsung SCO-2120R - Manual (Page 12)

COLOR CCD CAMERA User Guide 22 COLOR CCD CAMERA User Guide 23
Operating Your Camera
- START ZOOM : By moving the left or right direction of the Function Setup Switch in the
‘START ZOOM’ item to select the zoom position from 1x to 12x to be
returned after the ‘SMART ZOOM’ action is over.
- TARGET ZOOM : By moving the left or right direction of the Function Setup Switch in the
‘TARGET ZOOM’ item to select the zoom position from 1x to 12x to be
used during MOTION DETECTION.
- DWELL TIME : By moving the left or right direction of the Function Setup Switch in the
‘DWELL TIME’ item to select a time between 5 and 60 seconds for the dwell
time before the zoom is returned to the ‘START ZOOM’ position.
(5,7,10,15,20,30,40,60 sec)
Tips on Using the Motion Detection Feature
• The feature may not function properly under flickering light conditions.
• The camera interprets sudden changes in lighting and subsequent change in
brightness of an object as motion.
• With the feature enabled, other algorithms may require additional time to operate.
• This system does not guarantee prevention of fire or theft. The manufacturer shall not
be held responsible for any accident or damage incurred.
• Connect an external alarm device to MD Out on back of the camera.
Notes
MAIN SETUP
SSDR ON
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET OFF
FOCUS
EXPOSURE
FOCUS
ZOOM/FOCUS POS SETUP
↑ : TELE ↓ : WIDE
← : NEAR → : FAR
- ONE PUSH : Focus is automatically adjusted just once, after
zoom position is changed. Select 'ONE PUSH'
and press the Function Setup Switch to
confirm. Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM) positions
by moving the directional key of Function
Setup Switch while verifying the changes on
screen. Press the Function Setup Switch once
the desired image quality is obtained.
1. Press the Function Setup Switch to access the main setup menu and then position the
indicator over FOCUS moving the up or down direction of Function Setup Switch.
2. Press the Function Setup Switch.
MODE : You can select the most suitable zoom mode. Move the arrow indicator to
’MODE‘ by moving the up or down direction of the Function Setup Switch
FOCUS SETUP
MODE ONE-PUSH
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
ZOOM POS INIT OFF
USER PRESET OFF
LENS INIT MANUAL
RETURN