Samsung SCO-2120R - Manual (Page 13)

COLOR CCD CAMERA User Guide 24 COLOR CCD CAMERA User Guide 25
Operating Your Camera
ZOOM POS SETUP
↑ : TELE ↓ : WIDE
- AUTO : Select AUTO and press the Function Setup Switch to
confirm. Increase or decrease optical zoom (ZOOM)
or digital zoom (D-ZOOM) positions by moving the
up or down direction of the Function Setup Switch
while verifying the changes on screen. Enabling
D-ZOOM (ON) means that digital zoom will activate
once optical zoom ends. The focus automatically
adjusts when the lens zooms in and out.
- MANUAL : Select 'MANUAL' and press the Function Setup
Switch to confirm. Increase or decrease optical
zoom (ZOOM) or digital zoom (D-ZOOM)
positions moving directional key of Function
Setup Switch while verifying the changes on
screen. Press the Function Setup Switch until the
desired image quality is obtained. Focus can be
manually adjusted, independent of moving
zoom.
By moving the left or right direction of the Function Setup Switch in the ‘ZOOM’ item to select
‘AUTO TRACK’ or ‘TRACK’ and press Function Setup Switch to activate the zoom action focus
function.
- AUTO TRACK : Zooming in while deciding or adjusting the status of the focus.
- TRACK : The camera moves the focus track which is established.
- OFF : Only the zoom lens moves.
ZOOM TRACK : Select ‘ON’ for the ‘SMART ZOOM’ item in the MOTION DETECTION menu
and press Function Setup Switch to change the settings for the ‘SMART
ZOOM’ function.
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
ZOOM/FOCUS POS SETUP
↑ : TELE ↓ : WIDE
← : NEAR → : FAR
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
FOCUS SETUP
MODE AUTO
ZOOM TRACK AUTO TRACK
ZOOM SPEED FAST
D-ZOOM OFF
ZOOM POS INIT OFF
ZOOM SPEED : Configure zoom tracing speed using this feature. Position the indicator
over 'ZOOM SPEED' by moving the up or down direction of the Function
Setup Switch and then set to desired mode by moving the left or right
direction of the Function Setup Switch
D-ZOOM : Configure magnification limit from x2~x16 using this feature. Position the indicator
over 'D-ZOOM' by moving the up or down direction of the Function Setup Switch
Set 'D-ZOOM' to 'ON' and press the Function Setup Switch to confirm.
- FAST : To move zoom fast.
- SLOW : To move zoom slowly.
- MEDIUM : To move zoom at medium speed.
- Set 'ZOOM LIMIT' to the desired level by moving the left or
right direction of the Function Setup Switch. D-ZOOM LIMIT SETUP
▶ LIMIT X2
RETURN
• When the DIS is enabled, you cannot use the D-ZOOM.
Notes