Samsung SMART DOME SCC-C6407 - Manual (Page 26)

3-26
E
3-25
DIRECTION
This sets up the movement direction of the START to END location
(PAN location standard)
"RIGHT " : "LEFT " :
ENDLESS
This is a 360-degree rotation function that stops for the DWELL TIME only in the
START and END positions without running between the START and END
positions. It can be set to "ON" or "OFF".
SPEED
This is a setting function for movement speed setup. It can be set from
STEP1 to STEP64.
DWELL TIME
This is a function for setting up the time to stay in the START to END location.
PATTERN
This is a replay function so that the MANUAL functions such as PAN, TILT,
ZOOM, and FOCUS are played for 2 minutes.
❈ When the PATTERN is saved/executed, the PAN/TILT is operated with
PROPORTIONAL ON, TURBO OFF.
❈ If the SSC-1000 or SSC-2000 is used when uploading/downloading the
menu setup, reset the PATTERN because it may be different with the first
setting.
AUTO PAN
After selecting the locations of two points (PAN/TILT) of START and END,
it loops continuously in the set up SPEED. The number of AUTO PAN is
up to 4.
5. AUTO SET
The AUTO SET menu includes AUTO PAN, PATTERN, and SCAN and it
is able to set up the AUTO PLAY motion.
➜
Press
[Enter]
* * MAIN MENU * *
CAMERA SET...
VIDEO SET...
PRESET...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET...
SYSTEM INFO...
(AUTO SET)
AUTO PAN 1...
PATTERN 1...
SCAN 1...
AUTO PLAY ...
RET
➜
Press
[Enter]
AUTO PAN 1
POSITION SET ...
DIRECTION RIGHT
ENDLESS ON
SPEED 32
DWELL TIME 3S
EXIT QUIT
POSITION SET
The menu “POSITION SET …” sets the Start / End location of AUTO PAN.
Return to the settings screen and set the desired START location for
PAN/TILT, and then press the [ENTER] key. And, set the END location for
the PAN/TILT. Press the [ENTER] key to finish the setup for AUTO PAN
Start/End positions.
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-25