Troubleshooting, Reset function, Troubleshooting guide – Sony WEGA KV-DR34 User Manual

Page 33

Advertising
background image

33

Additional Information

Snowy picture

Noisy sound

Distorted picture

Noisy sound

Good picture

Noisy sound

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup.

Contact a Sony dealer for advice.

• Display the “CH PRESET” menu and

select “MANUAL PROGRAM” to preset
the channel again.

• Try using a booster.

• Display the “CH PRESET” menu and

select “MANUAL PROGRAM”.
Then, select “

SENS: LOW”.

• Turn off or disconnect the booster if it is in

use.

• Display the “CH PRESET” menu and

select the appropriate TV system
(“TV SYS”).

• Press SOUND or

.

Possible cause

Symptom

Solutions

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• Channel presetting is

inappropriate or
incomplete.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate.

• PIP sound is selected

when PIP is displayed.

x

Troubleshooting

If you have any problem while viewing your TV, you can either use the Reset
function or check the Troubleshooting guide below. If the problem persists,
contact your Sony dealer.

Reset function

Press the RESET button on your remote control.
Your TV will go blank for about half a second
then the picture will reappear with “RESET”
displayed on your TV screen for about 10 seconds.

Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.

Troubleshooting guide

Page

31

29

30

29

13

RESET

TV

RESET

continue

Advertising
This manual is related to the following products: