Finisher functions, Sort mode, Offset mode – Sharp AR-M451N User Manual

Page 62: Group mode, Staple sort mode

Advertising
background image

FINISHER

3-8

Finisher functions

Sort mode

Sorted sets will be delivered.

Offset mode

Group mode

Groups of prints or copies of the same page will be
delivered.

Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation. The offset function can only be
used in the offset tray.
Stapled sets will not be offset.

Staple sort mode

Collated sets will be stapled and delivered to the offset tray. The stapling positions, orientation, paper size for
stapling, and stapling capacity are shown below.

Original

Printouts

Offset mode

Non-offset mode

Original

Printouts

Stapling positions

Top left corner of
printouts

Centre left two
positions of printouts

Lower left corner
of printouts

Portrait orientation

Landscape orientation

Available paper sizes: A4, B5,
and 8-1/2" x 11"
Stapling capacity: Up to 30
sheets for any available sizes

Same as above

Same as above

Stapling cannot be made.

NOTES
● Stapling can only be done when the offset tray has been selected.
● If mixed paper sizes are selected for stapling jobs, stapling will be automatically cancelled.

NOTE

Transparency film heavy paper, punched paper, labels , envelopes and postcards cannot be stapled.

Copy_EX.book 8 ページ 2004年9月28日 火曜日 午後9時54分

Advertising