Using the finisher functions – Sharp AR-M451N User Manual

Page 63

Advertising
background image

FINISHER

3-9

3

Using the finisher functions

When the [OUTPUT] key on the main screen of copy mode is touched, a screen for selecting the sort/group/staple
sort functions and selecting an exit tray will appear. As a selection is made, the touch key for the selection will be
highlighted.

(1) [GROUP] key (See page 3-8.)

When Group is selected, all copies of the same
original will be grouped.

(2) [STAPLE SORT] key (See page 3-8.)

When Staple Sort is selected, sorted sets will be
stapled and delivered to the offset tray. (They will
not be offset stacked.)

(3) [SORT] key (See page 3-8.)

When Sort is selected, sets of copies will be
sequentially delivered.

(4) Icon display

An icon representing a selected function (sort,
staple sort or group) is displayed.

(5) [OFFSET] key (See page 3-8.)

If Offset is checked, offset is enabled. If not
checked, offset will not function. If staple sort is
selected, the check mark of offset will be
automatically cancelled. If the staple sort function
is selected, the checkmark in the offset checkbox is
automatically removed.

(6) [OFFSET TRAY] key (See page 3-8.)

When the offset tray is selected, copies will be
delivered to the offset tray. When staple sort is
selected, the offset tray will be automatically
selected.

(7) [TOP TRAY] key

When top tray is selected, copies will be delivered
to the top tray.

(8) [OK] key

Press to close the output screen and to return to
the main screen.

OK

STAPLE

SORT

OUTPUT

GROUP

SORT

OFFSET

TRAY

TOP TRAY

OFFSET

(1)

(2) (3)

(4) (5)

(6)

(7)

(8)

Copy_EX.book 9 ページ 2004年9月28日 火曜日 午後9時54分

Advertising