Sony TA-FE370 - Manual (Page 5)

5 GB
Parts Identification/Getting Started
Unpacking
Check that you have received the following
supplied items:
• Remote commander (remote) RM-S325 (1)
• Sony batteries R6 (size-AA) (2)
Inserting batteries into the
remote
Insert two R6 (size-AA) batteries, matching the
+ and – on the batteries with the markings
inside the battery compartment. When using
the remote, point it at the remote control sensor
on the amplifier.
Tip
With normal use, the batteries should last for about
6 months. When the remote no longer operates the
amplifier, replace all the batteries.
Notes
• Do not leave the remote near an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight
or lighting equipment. Doing so may cause a
malfunction.
• If you don’t use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Getting Started
Hookup overview
The amplifier allows you to connect and
control the following audio components.
Follow the hookup procedure indicated for
each component that you want to connect.
Before you get started
• Turn off the power to all components before
making any connections.
• Do not connect the mains leads of the various
components until all connections are
completed.
• Use the audio connecting cords supplied with
each component for hooking up with the
amplifier. Purchase and use optionally available
cords as required.
• Be sure to make connections firmly to prevent
hum and noise.
• When connecting an audio connecting cord, be
sure to match the R (right) and L (left) jacks of
the amplifier to the R and L jacks on the other
components.
DAT deck Tape deck Tuner
MD deck Turntable CD player
Speaker (L) Speaker (R)