Sony HT-SS1000 - Manual (Page 13)

13 GB
E:\SEM_Janet\Year2006\Revision_Data\Revision4_SF1000\JC06xxx_2661769141SF1000_GB\2
661769141\GB03CON_HT-SF1000-CEL.fm masterpage: Right
model name1[HT-SF1000]
model name2[HT-SS1000]
2-661-769-14 (1)
Gettin
g
Sta
rted
Before you install the speaker and sub woofer,
be sure to attach the supplied foot pads to
prevent vibration or movement as shown in the
illustration below.
Example of HT-SS1000 front
speaker
HT-SF1000 only
You need to attach the supplied foot pads to the
sub woofer only.
HT-SS1000 only
You need to attach the supplied foot pads to the
speakers and sub woofer.
HT-SS1000 only
For greater flexibility in positioning the
speakers, use the optional WS-FV11 or
WS-FV10D speaker stand (available only in
certain countries). For details, refer to
operating instructions supplied with the
speaker stand.
HT-SS1000 only
You can install your front and surround
speakers on the wall.
1
Prepare screws (not supplied)
that are suitable for the hole on
the back of each speaker. See
the illustrations below.
2
Fasten the screws to the wall.
The screws should protrude 5
to 7 mm.
Installing the speakers on a flat
surface
Installing the speakers on the
speaker stand
Installing the speakers on the
wall
more than 4 mm
more than 25 mm
Hole on the back of the speaker
4.6 mm
10 mm
5 to 7 mm
continued
GB01COV_HT-SF1000-CEL.book Page 13 Sunday, February 12, 2006 10:44 AM