Sony Trinitron KV-V1430P - Manual (Page 20)

20 Basic Operations
Recording TV Programmes
Recording TV Programmes
1 Press ;, PROGR +/– or number buttons on the Remote Commander, or
PROGR +/– on the video TV when the u lamp is lit in red.
2 Insert a cassette with a safety tab.
3 Select the programme position with PROGR+/–. You can also use number
buttons on the Remote Commander. For double-digit numbers (e.g.14),
first press ÷, then press 1 and 4.
4 Press REC r.
The REC lamp on the front of the video TV lights up and recording begins.
To stop recording
Press STOP p.
When the tape reaches the end, the video TV rewinds the tape
automatically to the beginning, then stops. This function does not work
when the power of the video TV is off.
To pause recording
Press PAUSE P.
To resume recording, press PAUSE P again.
You can cut out an unwanted scene during recording with this button.
1 Press PAUSE P when an unwanted scene appears on the screen.
Recording pauses.
2 Press PAUSE P again to release the pause mode at the desired scene.
Recording resumes from the point set in step 1.
When the recording pause mode lasts for about 5 minutes, the video TV
stops recording to protect the quality of video tapes.
Recording with the TV Off
Press u.
The TV screen is turned off and the u lamp lights up.
The video TV continues recording.
KV-V1430K/P
KV-V2110K/P
ON TIMER
SLEEP
TIMER REC
REW FF PLAY
COUNTER
RESET
1 2 3
4 5 6
7 8 9
-/-- 0
PROGR
REC
STOP PAUSE
TIMER
QUICK