Sony Trinitron KV-V1430P - Manual (Page 5)

Getting Started 5
GB
Connecting an Outdoor Aerial
For better TV reception and recording with clear video picture, connect an
outdoor aerial to your video TV.
To connect a VHF aerial or a combination
VHF/UHF aerial—75-ohm coaxial cable (round)
Attach an IEC aerial connector to 75-ohm coaxial cable.
Plug the connector into the
(aerial) socket of the video TV.
To connect both VHF and UHF aerials
Attach the aerial cable ends to the VHF/UHF mixer (not supplied).
Plug the mixer into the
(aerial) socket of the video TV.
After connecting the aerial, connect the mains lead to a wall outlet.
Connecting an Indoor Aerial (KV-
V1430K/P only)
If your local VHF/UHF signal is strong, an indoor aerial can be used to
obtain a clear picture. Connect the supplied dipole aerial as follows.
1 Insert the aerial until it clicks.
2 After turning on the video TV, adjust the aerial for best reception.
1
2
Rear
or
On a wall
VHF/UHF aerial
Rear
300-ohm twin-lead cable
VHF/UHF mixer
75-ohm coaxial cable
UHF aerial VHF aerial
Step 2 — Connecting the Aerial