State Industries ASME SSE-5 User Manual
Page 36
Advertising
36
MedIuM teMperature - two heaters VertIcal storaGe tank
MedIuM teMperature - two heaters horIZontal storaGe tank
return lIne froM fIXture cIrculatInG
loop (If used) should connect to any
openInG near BottoM of tank.
*pIpe relIef ValVe to open draIn.
†tank teMperature control set
at desIred teMperature (MaX. 170°).
heater therMostat set at least 5°
hIGher.
Install In accordance wIth all
local codes.
NOTE: BRANCH PIPING TO ALL HEATERS
Must Be saMe sIZe and lenGth for
equal flow. these Branches May
Be sIZed up to 1 1/4” so that cross
sectIonal areas of all Inlets and
outlets at least equal area of theIr
respectIVe MaIn pIpInG.
reVerse return pIpInG shown.
Advertising
This manual is related to the following products: