Getting started, Unpacking, Inserting batteries into the remote – Sony DAV-FX80 User Manual

Page 13: Unpacking inserting batteries into the remote

Advertising
background image

Ge
tting Star

te

d

13

US

Check that you have the following items:

• Speakers (5)

• Subwoofer (1)

• Posts (long

×

2, short

×

2)

• Bases (2)

• Terminal covers (2)

• Screws (10)

• AM loop antenna (aerial) (1)

• FM wire antenna (aerial) (1)

• Speaker cords (5 m

×

4, 15 m

×

2)

(16.5 ft.

×

4, 49.5 ft.

×

2)

• Video Cord (1)

• Remote Commander (remote) (1)

• Size AAA (R03) batteries (2)

• Wall-mount pads

• Operating Instructions

• Speaker and TV connections (card) (1)

You can control the system using the supplied
remote. Insert two size AAA (R03) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor

on the system.

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from

the sun or lighting apparatus. Doing so may cause a
malfunction.

• If you do not intend to use the remote for an extended

period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.

Getting Started

Unpacking

Inserting Batteries into
the Remote

Note

1

Slide open the cover.

2

Remove the
cover by pinching
the sides.

2

Advertising
This manual is related to the following products: