Listening to the radio, Naming preset stations – Sony DAV-FX80 User Manual

Page 74

Advertising
background image

74

US

6

Press

X

/

x

to select the preset number

you want.

7

Press ENTER.

The station is stored.

8

Repeat 1 to 7 to store other stations.

To change the preset number

Restart from Step 1.

To change the AM tuning interval
(except for Middle Eastern
model)

The AM tuning interval can be set to either
10 kHz or 9 kHz.
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing "/1 on the system. While holding down
> (on the system), press "/1 on the system to
turn on the power. If you change the interval,
AM preset stations will be erased.
To reset the interval, repeat the same procedure.

Listening to the radio

Preset radio stations in the system’s memory
first (see “Presetting radio stations” (page 73)).

1

Press FUNCTION repeatedly until “FM”
or “AM” appears in the front panel
display.

The last received station is tuned in.

2

Press PRESET + or – repeatedly to
select the preset station you want.

Each time you press the button, the system
tunes in one preset station.

3

Adjust the volume by pressing
VOLUME +/–.

To turn off the radio

Press "/1.

To listen to non-preset radio
stations

Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. Press x when you stop the automatic
tuning.

• If an FM program is noisy, press FM MODE so that

“MONO” appears in the front panel display. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.

• To improve reception, reorient the supplied antennas

(aerials).

• You can check the frequency by pressing DISPLAY

repeatedly (page 56).

Naming preset stations

You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the
system’s front panel display when a station is
selected.
Note that no more than one name can be entered
for each preset station.

1

Press FUNCTION repeatedly until “FM”
or “AM” appears in the front panel
display.

The last station you received is tuned in.

2

Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.

3

Press TUNER MENU.

4

Press

C

/

X

/

x

/

c

repeatedly until “Name

In?” appears in the front panel display.

5

Press ENTER.

6

Create a name by using the cursor
buttons.

Tip

Advertising
This manual is related to the following products: