Sony DVP-F5 - Manual (Page 100)

100
Additional Information
Remedy
• Clean the disc.
• If the video signal from your DVD player has to go
through your VCR to get to your TV, the copy-
protection applied to some DVD programs could affect
picture quality. If you still experience problems after
checking your connections, please try connecting your
DVD player directly to your TV’s S-input, if your TV is
equipped with this input (page 17).
• Check that this player is placed in a horizontal position
and there is no mechanical vibration or shock.
• There is a flaw on the disc.
• When you watch the picture of other equipment using
the LCD screen, the picture noise may appear if the
color system of the input signal is different from that of
the LCD screen. Change the color system of the LCD
screen by pressing DISPLAY on the player for more
than two seconds (DVP-FX1 only, page 98).
• Picture noise may appear when you use the LASER
LINK function. Use the supplied audio/video
connecting cord to get a clear picture.
• The aspect ratio is fixed on your DVD.
• Make sure you play a VIDEO CD with PBC functions.
• Make sure you follow the instructions for interactive
operations.
Refer to the instructions supplied with the disc.
• Check that the player is connected securely.
• The audio connecting cord is damaged. Replace it
with a new one.
• Make sure you connect the player to the audio input
connectors on the receiver (amplifier) (page 20).
• Make sure you turn on the TV and the receiver
(amplifier).
• Make sure you select the appropriate input on the
receiver (amplifier) so that you can listen to the sound
from the player.
Troubleshooting (continued)
Symptom
Picture noise appears.
Even though you set the aspect
ratio in “TV TYPE” in
“SCREEN SETUP” of the setup
display, the picture does not fill
the screen.
The VIDEO CD menu does not
appear.
There is no sound.
Sound
Pictur
e