Sony DVP-F5 - Manual (Page 93)

Settings and Adjustments
93
x DOLBY DIGITAL
Selects the Dolby Digital signals to be output when you have made the
connections using an optical digital connecting cord.
• D-PCM (Downmix PCM): when you play Dolby Digital sound tracks, the
output audio signals are mixed down to 2 channels. You can select
whether the signals conform to Dolby Surround (Pro Logic) or not by
making adjustments to the “DOWNMIX” item in “AUDIO SETUP.”
• DOLBY DIGITAL: when the player is connected to an audio component
with a built-in Dolby Digital decoder.
If the player is connected to an audio component lacking a built-in Dolby
Digital decoder, do not set this. Otherwise, when you play the Dolby
Digital sound track, a loud noise or no sound will come out from the
speakers, affecting your ears or causing the speakers to be damaged.
Note
When you select “D-PCM, ” set Virtual Enhanced Surround (VES) to “OFF.”
Otherwise, the player will not output signals when you have made the connections
using an optical digital connecting cord.
x DTS
Selects the DTS signals to be output when you have made the connections
using an optical digital connecting cord.
• OFF: when the player is connected to an audio component lacking a built-
in DTS decoder.
• ON: when the player is connected to an audio component having a built-
in DTS decoder.
If the player is connected to an audio component lacking a built-in DTS
decoder, do not set this. Otherwise, when you play the DTS sound track, a
loud noise will come out from the speakers, affecting your ears or causing
the speakers to be damaged.