SMC Networks SMCWHSG44-G - Manual (Page 87)

A-2: LED Definitions
There are several LED indicators on the housing of a Router. They are
defined as follows:
• PWR : Power
• ALV : Alive. Blinks when the SMCWHSG44-G is working normally.
• RF : IEEE 802.11b/g interface activity
• WAN/LAN : Ethernet WAN/LAN interface activity
Appendix B: Troubleshooting
Check the following first:
• Make sure that the power of the Router is on and the Ethernet cables are
connected firmly to the RJ-45 jacks of the Router.
• Make sure that the LED ALV of the Router is blinking to indicate the
Router is working.
• Make sure the types of the Ethernet cables are correct. Recall that there
are two types-normal and crossover.
• Make sure that the DSL or cable modem connected to the Router is
powered on.
86