Sennheiser SKM100 User Manual
Page 14
13
Using the radio microphone
To switch the radio microphone
off:
̈
If necessary, deactivate the lock mode (see page 14).
To switch the radio microphone on and to
deactivate the
RF signal on switch-on
(offline operation):
To
activate
the
RF signal
:
You can switch the radio microphone on and
deacti-
vate the RF signal on switch-on
. For more informa-
tion, see next section.
̈
Keep the
ON
/
OFF
button
pressed until “
OFF
”
appears on the display panel. The red
ON
LED
¾
goes off and the display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
will cancel your entry (ESC function)
and return you to the current standard display.
̈
Keep the
ON
/
OFF
button pressed until “
RF Mute
On?
” appears on the display panel.
̈
Press the multi-function switch.
The transmission frequency is displayed but the
radio microphone does not transmit an RF signal.
The transmission icon
ብ
is not displayed.
Use this function to save battery power or to
prepare a radio microphone for use during live oper-
ation without causing interference to existing trans-
mission links.
̈
Briefly press the
ON
/
OFF
button. “
RF Mute Off?
”
appears on the display panel.
̈
Press the multi-function switch.
The transmission icon
ብ
is displayed again.
ON/OFF
ON/OFF
MHz
533.875
ew100 G3
MUTE
P
AF
ብ
ON/OFF