Sennheiser SKM100 - Manual (Page 23)

22
Adjusting settings via the operating menu
The name can be displayed on the standard displays
“
Frequency/Name ” and “ Name/Frequency bank/Channel ”.
The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Activating/deactivating the automatic lock mode –
“Auto Lock“
The lock mode prevents that the radio microphone is
accidentally switched off or programed during operation.
The lock mode icon
ቦ
on the current standard display
indicates that the lock mode is activated.
For information on how to use the lock mode, refer to
page 14.
The extended menu “ Advanced Menu ”
Setting transmission frequencies for the frequency bank
“U” – “Tune”
Via the “ Tune ” menu item, you can set a transmission
frequency to be stored in the current channel or you can
select a different channel in the frequency bank “ U ” and
assign this channel a transmission frequency.
̈
Move the multi-function switch to select a
character.
̈ Press the multi-function switch to change to the
next segment/character or to store the complete
entry.
̈
Move the multi-function switch to select the
desired setting.
When you have selected one of the system banks
and then select the “
Tune ” menu, the radio micro-
phone automatically switches to channel 1 of the
frequency bank “
U ”. In this case, “ U.1 ” briefly
appears on the display panel.
Upon delivery, the channels of the frequency bank
“
U ” are not assigned a transmission frequency.
When you are in the “ Tune ” menu item, the
RF signal is deactivated.
Active
Auto Lock Active
Auto Lock
Inactive
Auto Lock Menu
Call up “Auto
Lock” Select the desired
setting Store the setting
“Stored”