Led indicators, Wps button – SMC Networks SMCWUSBS-N User Manual
Page 19
LED Indicators
1-3
LED Indicators
The Wireless USB Adapter includes two status LED indicators, as described in the
following figure and table.
WPS Button
Use the WPS button on the Wireless USB Adapter to automatically connect multiple
devices to the network. Within two minutes, press the physical or virtual button on
wireless client devices to enable them to join the WLAN.
The WPS configuration process may be initiated on any device and there is no
restriction to the order in which buttons are pressed.
Any WPS-compatible devices could unintentionally join the WLAN if they are within
range during the two-minute set up period after the WPS button is pressed.
For more details about Wi-Fi Protected Setup, please refer to “WPS” on
LED
Status
Description
WPS
On/Flashing Green
Indicates the WPS button is pressed, and WPS authentication is
in progress.
Off
Indicates WPS authentication is not in progress.
Link/Activity
On/Flashing Green
Indicates the power is on, and the 802.11b/g/n radio is enabled.
Flashing indicates wireless network activity.
Off
Indicates the power is off, or the 802.11b/g/n radio is disabled.
802.11b/g/n Link/Activity
WPS Authentication