Spalding M867SF12 - Manual (Page 12)

12 ID# M867SF12 08/06
11.
5
8
Refer To Instructions
Included With Rim
Hardware For Rim
Assembly.
Rim Assembly
6
11
7
Before starting, tighten assembly bolt (14) at 6-3/4” from the end of the bolt to the top of the nut (18)
(Figure C).
Remove rim cover (16), attach rim assembly (3) to backboard (11) and reattach rim cover (16).
** For rim assembly see instructions included with rim.
6-3/4”
FIGURE
C.
10
10
18
14
3
28
IMPORTANT!
POLYCARBONITE & ACRYLIC BOARDS:
Carefully cut and peel protective film
away from board prior to attaching
rim.
GLASS BOARDS:
DO NOT cut and peel protective film
away from back of board prior to
attaching rim!