Sony CPD-20SF2T5 - Manual (Page 8)

8
RESET
RESET
Entering New Timings
Resetting the Adjustment
Data to Factory-preset Levels
To reset an adjustment item
Press the button of the adjustment item you want to reset,
and then press the RESET button before the OSD (On
Screen Display) disappears.
To reset the brightness, contrast, size,
center, pincushion, and color
temperature adjustment data at once (for
the received signal)
Press the RESET button with something like a pen for 1
second when no OSD is shown.
To reset all adjustment data to factory-
preset levels
Press and hold the RESET button for more than 2 seconds.
All adjustment data including the brightness and contrast
are reset to factory-preset levels.
Adjustments
Power Saving Function
When using a video mode that is not one of the 10 factory
preset modes, some fine tuning may be required to optimize
the display to your preferences. Simply adjust the monitor
according to the preceding adjustment instructions. The
adjustments will be stored automatically and recalled
whenever that mode is used.
A total of 15 user-defined modes can be stored in memory.
If the 16th mode is entered, it will replace the first.
u Power
indicator
green on
green on
green on
off
off
POWER
SAVING
indicator
off
orange on
orange on
orange on
off
Required
resumption
time
—
approx.
3 sec.
approx.
3 sec.
approx.
10 sec.
—
Power
consumption
100%
approx.
70%
approx.
10%
approx.
4%
0%
State
Normal
operation
Standby
(1st step of
power saving)
Suspend
(2nd step of
power saving)
Active-off
(3rd step of
power saving)
Power-off
Mode
1
2
3
4
5
This monitor meets the power saving guidelines set by the
EPA Energy Star Program as well as the more stringent
TCO95 (NUTEK) guidelines. It is capable of reduced power
consumption when used with a computer equipped with
Display Power Management Signaling (DPMS). By sensing
the absence of the sync signal coming from the computer, it
will reduce the power consumption as follows:
CAUTION: The Power Saving function will automatically
put the monitor into Active-off state if the power
switch is turned on without any video signal
input. Once the horizontal and vertical syncs are
sensed, the monitor will automatically return to
its Normal operation state.