Samsung GALAXY TAB GT-P1000 - Manual (Page 51)

Connectivity 51
Your device uses non-harmonised frequency and is intended for
use in all European countries. The WLAN can be operated in the EU
without restriction indoors, but cannot be operated outdoors in
France.
›
Activate the WLAN feature
In Menu mode, select
1
Settings → Wireless and network → Wi-Fi
settings.
Select
2
Wi-Fi to activate the WLAN feature.
An active WLAN running in the background will consume battery
power. To preserve battery power, activate the WLAN only when
needed.
Find and connect to a WLAN
›
In Menu mode, select
1
Settings → Wireless and network → Wi-Fi
settings.
The device will automatically search for available WLANs.
Select a network under
2
Wi-Fi networks.
Enter a password for the network (if necessary).
3
Select
4
Connect.
If you want to transfer files from or to a memory card, insert a memory
1
card into the device.
In Menu mode, select
2
Settings → Wireless and network → USB
settings → Mass storage.
Press [
3
] to return to Idle mode.
Using the PC data cable, connect the multifunction jack on your device
4
to a PC.
When connected, select
5
Mount.
Open the folder to view files.
6
Copy files from the PC to the memory card.
7
When you are finished, select
8
Turn Off.
To disconnect the device from the PC, click the USB device icon
on the Windows task bar and click the option to safely remove the
mass storage device. Then remove the PC data cable from the PC.
Otherwise, you may lose data stored on the memory card or damage
the memory card.
Wi-Fi
Learn to use your device’s wireless networking capabilities to activate and
connect to any wireless local area network (WLAN) compatible with the
IEEE 802.11 a/b/g/n standards.
You can connect to the internet or other network devices anywhere an
access point or wireless hotspot is available.