Flash – Sony Cyber-shot 4-143-374-11(1) User Manual

Page 26

Advertising
background image

J:\ichihashi\works\CX60980_990\GB_HB\4143374111DSCW180W190\040REC.fm

master:Right_L1

DSC-W180/W190

4-143-374-11(1)

Table of

contents

Operation

Search

MENU/Settings

Search

Index

26

GB

Flash

1 Press (Flash) on the control button.

Each time you press (Flash), the setting will change.

• The flash strobes twice. The first flash adjusts the light quantity.
• While charging the flash,

is displayed.

• You cannot use the flash during burst shooting.

Flashes when there is insufficient light or backlight.

Flash always operates. (Flash On)

Flash always operates.
The shutter speed is slow in a dark place to clearly shoot the
background that is out of flash light. (Slow Synchro)

Flash does not operate.

Notes

z

When the “White circular spots” appears in flash

photos

This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camera’s flash, they appear as white circular spots.

How can the “White circular spots” be reduced?

• Light the room and shoot the subject without a flash.
• Select

(High Sensitivity) mode in Scene Selection. ([Flash Off] is automatically selected.)

• Even though you selected

(High Sensitivity) mode in Scene Selection, the shutter speed might be

slower under low-light conditions, or in a dark place. In that case, use a tripod or hold your arms
firmly at your side after pressing the shutter button.

Camera

Subject

Particles (dust, pollen, etc.)
in the air

Advertising
This manual is related to the following products: