Siemens M1 - Manual (Page 38)

37
GSM M1 Module, English: A24859-N4000-A100-1-7677 gsm-m1-e.fm
Technical reference section
6.3.96
Example:
Enter: AT+COPS?
GSM module: +COPS: 0, 0, " Operator Name "
OK
This command instructs the module to display a list of available network operators. The
list must first be generated. That process can take up to 60 seconds.
< mode n> n= [0...3]
Mode n Meaning Explanation
0 Automatic Network operator is selected automatically.
1 Manual Network operator is selected manually.
2 Sign off of network The GSM-M1 is signed off of the network.
3 Sets format f only. You can select the format for displaying the
network operator. This is true only of the read
command AT+COPS?.
<format f> n= [0..2]
0 Long, alphanumeric
format The operator is displayed in 16-character alpha-
numeric format.
2 Numeric format The operator is displayed in numeric format.
Operator Network operator The network operator is displayed in
format f.
AT+COPS=? - Display list of available network operators
AT+COPS=?
Command AT+COPS=?
Result code +COPS: List with (<STATUS n>,
<operator, alphanumeric format>, <operator, numeric format>)