Sony Ericsson P908 - Manual (Page 149)

Control panel 149
This is the Internet version of the user’s guide. © Print only for private use.
To activate the Power menu
Select the Prompt me... check box and tap Done .
To cancel the selection of Power menu
Clear the Prompt me... check box and tap Done .
International
Use these settings to set the locations shown in Time, as well
as the units for distances, numerical separators, and how
currency values should be shown.There are two tabs:
Location
and Numbers.
On the Location tab
• Set Current country/region and Current city to your current
location.
• Set Other country/region and Other city to an alternative
location (for example your home location if you are abroad).
If the city you want is not listed, select another city in the
desired time zone.
On the Numbers tab
Set the decimal separator and thousands separator you desire.
Locks
Locks contains options for activating the locks on the device,
the SIM card and the keys on the keypad, and for changing the
lock codes, see ‘P908 locks’ on page 40.
Sounds and alerts
Use these settings to control sounds and alerts of your P908.
• Calls tab – Sets ring tones and volume.
• Messages tab – Sets notification alerts for messages.
• Other tab – Sets button and screen clicks, reminders, alarms,
and other notifications.
You can choose to use any sound recording or audio file. You can
select ring signals that are stored on your local storage or on a
Memory Stick. If the selected file is later deleted or moved, the
Default Melody will be played instead.
Note If you use an audio file as a ring tone, alarm or
notification signal, it will be played using the Multimedia
volume setting. The ring volume setting will not affect the sound
volume.
To listen to the selected ringtone or alert
1. Tap the icon to listen to the signal.
2. Tap again to stop playback.