Sony Ericsson P908 - Manual (Page 53)

Phone 53
This is the Internet version of the user’s guide. © Print only for private use.
• Including a tone sequence in the call setup. After the phone
number, but before the digits, press and hold
to insert
a pause, represented by the character p . Then press your
digits. Finally make the call by pressing .
• Program digit sequences
into a Contact card for the
service. Each digit
sequence to be sent as
tones must begin with
pc .
Once your call to the
service has been
established and you want
to send one of your pre-
programmed digit
sequences, choose
Show
contact on the Phone menu
to get to the Contact card
with the tone sequences.
Note It is not advisable to
program any personal codes
into your P908, in case your phone is stolen or lost.
Support for TTY
Teletype (TTY) accessory, text phone, is an aid for people with
speech impairments.
To use the TTY device together with the P908
1. Connect the TTY device to the accessories connector at the
base of the P908.
2. In Phone, go to Edit > Preferences > TTY Accessory and select
the check box to set the P908 into TTY mode.
Refer to the TTY device user manual to find out how to use the
device. It may be necessary to use an adapter between the TTY
device and the P908.
You can still make normal calls with the P908 in TTY mode but
other accessories such as handsfree will not work properly.
Do not open the Flip during a TTY call. It will impair the quality
of the connection.
Note Support for voice carry over (VCO) and hearing carry
over (HCO) is handled through the TTY device and not through
the phone.
Chat Edit Contacts Edit Unfiled
Bank
+4613244500 p1#1234567890
p10#0#34#56789 (w)
p30#1234#56 (w)
p10#1#567890123 (w)
p20#123456789 (w)