Sunbeam FP7820 - Manual (Page 17)

15
DEUTS
CH
EN
GLI
S
H
F
R
ANÇAIS
ES
P
A
ÑOL
IT
ALIA
NO
JAP
ANE
SE
COMP
L & W
A
R
R
Operation
The image is already
optimized for many display
modes; however the user controls
can be used to adjust the image to
your liking.
• Press the OSD Enter button to display the main OSD menu.
• Use the '-' or '+' button to move among the icons. Select an icon and press
OSD Enter to access that function. If there is a sub-menu, you can move
between options using the '-' or '+' button, then press OSD Enter to select
that function. Use the '-' or '+' button to make adjustments.
The settings are saved after
adjustment and when
exiting the OSD and will be
effective thereafter.
• Press the Exit button to move backwards through the sub-menus and exit
from the OSD.
Note: After making adjustments, the Power indicator LED will briefly
flash green to indicate that the new value has been saved.
OSD Lock / Unlock
This feature allows you to secure the current control settings, while allowing
the user to adjust Brightness and Contrast, so that they cannot be
inadvertently changed. You can unlock the OSD controls at any time by using
the same procedure.
Push and hold the OSD Enter button for 5 seconds to Lock or to Unlock.
When locked, a “LOCKED” message will be displayed on Menu.
T710_E_update.fm Page 15 Monday, July 8, 2002 11:44 AM