Sunbeam FP7820 - Manual (Page 23)

21
DEUTS
CH
EN
GLI
S
H
F
R
ANÇAIS
ES
P
A
ÑOL
IT
ALIA
NO
JAP
ANE
SE
COMP
L & W
A
R
R
Power Management
If your computer has
previously been used
with a CRT monitor and is
currently configured to a
display mode outside the
range that the Flat Panel
monitor can display, you
may need to re-attach the
CRT monitor temporarily
until you have re-configured
the computer, preferably to
1280 x 1024 at 60Hz.
To benefit from power management, the monitor must be used in conjunction
with a computer that implements the Video Electronics Standards Association
(VESA) Display Power Management Signalling (DPMS) Standard.
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable period.
There are several states as described in the table below.
As an E NERGY S TAR
® Partner, IBM has determined that this product meets the
E NERGY S TAR
®
guidelines for energy efficiency.
For optimal performance, switch off your monitor at the end of each working
day, or whenever you expect to leave it unused for long periods during the
day.
* There may be a slight delay before the picture reappears.
Product Disposal
The fluorescent lamp in the liquid crystal display contains a small amount of
mercury. Dispose of it as required by local ordinances and regulations.
State
Power
Indicator
Screen
Restoring
Operation
Compliance
On Steady green Normal
DPMS
Standby
Blinking green Blank
Press a key or
move the mouse.
E NERGY S TAR®
DPMS
Suspend
Blinking green Blank
Press a key or
move the mouse. *
E NERGY S TAR®
DPMS Off Blinking green Blank
Press a key or
move the mouse. *
E NERGY S TAR®
T710_E_update.fm Page 21 Monday, July 8, 2002 11:44 AM