Sony DVP-NS705V EN - Manual (Page 73)

73
U
si
n
g Vari
ous
A
ddi
tiona
l Fun
ct
io
ns
Controlling the volume of your
AV amplifier (receiver) with the
remote
For DVP-NS705V
1
Hold down [/1, and enter your AV
amplifier (receiver)’s manufacturer’s
code (see the table below) using the
number buttons.
2
Release [/1.
The 2 +/– buttons control the AV
amplifier’s volume.
◆ If you want to control the TV’s volume
Repeat steps above and enter the code
number 90 (default).
For DVP-NS905V
1
Slide the TV/DVD switch to DVD.
2
Hold down [/1, and enter your AV
amplifier (receiver)’s manufacturer’s
code (see the table below) using the
number buttons.
3
Release [/1.
The 2 +/– buttons control the AV
amplifier’s volume.
◆ If you want to control the TV’s volume
Slide the TV/DVD switch to TV.
z Hint
If you want to control the TV’s volume even when
the TV/DVD switch is set to DVD, repeat steps
above and enter the code number 90 (default).
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Number
buttons
[/1
2 +/–
Number
buttons
[/1
2 +/–
TV/DVD
switch
Manufacturer Code number
Sony 80, 88, 89, 91
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96