Sony DVP-NS705V EN - Manual (Page 82)

82
• SUBWOOFER
Notes
• The cut off frequency for the subwoofer is fixed at
120 Hz.
• If your speakers are too small to reproduce low
bass frequencies, utilize a subwoofer for low
frequency sound. When you set all speaker
settings to “SMALL,” the bass redirection
circuitry will be activated and the bass
frequencies are output from the subwoofer.
• Even if there are fewer than 6 speakers connected,
the player distributes the audio signal components
to the front speakers.
◆ DISTANCE
Sets the distance from your listening position
to the speakers.
Set the distance to your front speakers in
“FRONT” first (C). Values in “CENTER”
(centre speaker) and “REAR” (rear speaker)
will automatically change to the same value
(D and E). Adjust these values to reflect the
actual distance to your centre and rear
speakers.
Be sure to change the value in the Setup
Display when you move the speakers.
The default adjustments are in parentheses.
Notes
• If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
• Do not place the rear speakers farther away from
your listening position than the front speakers.
• These settings do not affect the Super Audio CD
Multi audio signals.
◆ BALANCE
Varies the balance of the left and right
speakers. Be sure to set “TEST TONE” to
“ON” for easy adjustment.
The default adjustments are in parentheses.
◆ LEVEL
Varies the level of each speaker. Be sure to
set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
NONE Select this if you do not connect
a subwoofer.
YES Select this if you connect a
subwoofer to output the LFE
(low frequency effect) signals
from the subwoofer.
(1~15m) (1~15m)
FRONT
(3 m) Set this between 1 and
15 metres in 0.2 metre
increments.
CENTER
(3 m) Set this within –1.6 and +0.6
metres of the “FRONT” setting
in 0.2 metre increments. For
example, if “FRONT” is set to
6 metres, “CENTER” can be set
between 4.4 and 6.6 metres.
REAR (3 m) Set this between the “FRONT”
setting and –5 metres in 0.2
metre increments. For example,
if “FRONT” is set to 6 metres,
“REAR” can be set between 1
and 6 metres.
FRONT
(0 dB) Set this between –6 dB [L] and
+6 dB [R] (0.5 dB increments).
REAR
(0 dB) Set this between –6 dB [L] and
+6 dB [R] (0.5 dB increments).
FRONT (0 dB) Set this between –6 dB and
0 dB (0.5 dB increments).
CENTER
(0 dB) Set this between –12 dB and
0 dB (0.5 dB increments).
REAR (0 dB) Set this between –12 dB and
0 dB (0.5 dB increments).
SUBWOOFER
(0 dB) Set this between –10 dB and
+10 dB (0.5 dB increments).