Sharp CP-BA150 - Manual (Page 5)

<P=004>
(Continued)
■
Placing the speaker system
The left and right speakers have individual shapes. For best per-
formance, place the speakers according to the diagram to the
left.
■
Connecting the AC power cord
Connect the AC power cord to the AC INPUT jack, then connect
the AC power cord plug to an AC outlet.
Notes:
● Unplug the AC power cord from the AC outlet if the unit will
not be in used for a prolonged period of time.
● Never use a power cord other than the one supplied. Use of
a power cord other than the one supplied may cause an
electric shock or fire.
■
Demo mode
When the AC power cord is first connected, the unit will enter
the demonstration mode.
To cancel the demonstration mode:
When the unit is in the stand-by mode (demonstration mode),
press the X-BASS/DEMO button.
● The demonstration mode will be canceled, the display will dis-
appear.
To return to the demonstration mode:
When the unit is in the stand-by mode, press the X-BASS/DEMO
button again.
Note:
● When the power is on, the X-BASS/DEMO button can be used
to select the extra bass mode.
■
To change the brightness of the display
Press the DIMMER button.
● The display will be made dimmer.
To return to the original brightness:
Press the DIMMER button again.
Left speaker Right speaker
AC 120 V, 60 Hz
To an AC outlet
To AC INPUT
(Main unit operation)
(Main unit operation)
When bright
When dark
CD-BA150(SEC) TINSE0279AWZZ
4