Teletext, Switching teletext on and off, Selecting a teletext page – Sony KP-44PS2U User Manual

Page 24: Using other teletext functions

Advertising

Teletext

Teletext

Most TV stations broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you
information on how to use the service.

! Please use a

broadcast

channel with a strong signal, otherwise there may be Teletext errors.

Teletext

Switching Teletext on and off

Select the TV channel which carries the teletext service you want
to view.

Press the

button once for Picture and Teletext (P&T). The screen

is divided in two, with the TV channel in the right corner and the
Teletext display on the left.

P&T mode: Press

then press PROGR +/- to change

the channel of the TV screen. Push the joystick Z or z to
change the size of the TV screen then press

again to

resume normal teletext reception.

Press

twice to get Teletext only.

Press

three times for Mix mode.

Press

a fourth time or press

to switch off Teletext.

Selecting a Teletext page

Input three digits for the page number using the numbered buttons on
the control. If you make a mistake, type in any three digits then re-enter
the correct page number.

Using Other Teletext Functions

Selecting the next or preceding page
Press the

(PROG+) or

(PROGR-) buttons on the remote

control to select the previous or next page.

Selecting a sub page
A teletext page may consist of several sub pages. In this case, after a
few seconds, an information line is displayed showing the number of
subpages.
Select the sub page by pressing 4 or $.

To freeze a Teletext page
Press the

button to freeze the page. Press again to cancel the freeze.

Revealing the index page
Press the

button to reveal the index page (normally page 100).

Fastext
(only available if the TV station broadcasts Fastext signals)

When the colour coded menu appears at the bottom of a teletext page,
press a coloured button on the remote control (red, green, yellow or blue)
to access the corresponding page.

Using the feature "Page Catching"

Press the numbered buttons on the remote control to select a teletext
page which has several page numbers on it (eg the index page).

Press the OK button.

Push the joystick 4 or $ to select the desired page number then
press the OK buttons. The requested page is displayed after
some seconds.

continued...

RM 903

PROGR

VIDEO

TELETEXT