Sunwave Tech. SRC-1600 - Manual (Page 24)

SRC-1600 User’s Manual
20
7. Press to confirm or to discard the
macro. The button’s original function will be
preserved.
8. To set another macro, repeat steps 3 ~ 7.
9. After you have finished setting macros, press
to leave this mode.
NOTES:
• Each macro can store up to 60 commands,
including delays. When the macro is full, you
cannot enter any more commands. If you try to
enter more commands, a triple beep will
sound.
• You can delete macros in the same way as you
would buttons. See Deleting codes on page 17.