Sharp VC-MH715HM - Manual (Page 15)

11
www.sharp.co.uk/support
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE
1. Press STOP to stop the video tape.
2. Press the FAST FORWARD / REWIND buttons on the remote control or on
the VCR front panel.
3. To stop fast forward/rewind, press STOP .
FORWARD/REVERSE VISUAL SEARCH
1. During playback to select search mode, press the
FAST FORWARD or REWIND buttons on
the remote control, or on the VCR front panel.
2. Press the PLAY/X2 button to resume playback.
OR
3. To decrease the speed, during visual search mode press
FAST FORWARD or REWIND again.
4. Press the PLAY/X2 button.
NOTE:
IMMEDIATE RECORDING
SELECTION OF A CHANNEL
Select the channel you wish to record by using the NUMBER BUTTONS on the VCR remote
control, or select the next/previous channel by pressing the CHANNEL / buttons
on the remote control or on the VCR front panel.
To change between single digit and 2-digit channel numbers, press the button.
For example, for channel 24, press the button then press 2 4 .
• There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
FF REW
DPSS
SLOW
TAPE
SPEED
REC PAUSE/STILL
REW FF
PLAY / X2
STOP
FF REW
PLAY / X2
FF REW
PLAY / X2
REMOTE CONTROL
TINS-A079UMN1.book Page 11 Monday, November 4, 2002 1:01 PM