Sharp TINSE4796FCZZ - Manual (Page 29)

27
BEFORE INSTALLING THE SOFTWARE
SOFTWARE REQUIREMENTS
The following requirements must be met to use the software described in this manual.
*1 For the types of computers and operating systems that can run the software, see
"SYSTEM REQUIREMENTS" (page 26).
*2 When the Internet fax expansion kit is installed, the PC-Fax driver can be updated
using the "PRINTER UTILITIES" CD-ROM to enable the driver to be used as a
PC-I-Fax driver. In this case, the driver can be used without the facsimile expansion
kit.
*3 The scanner driver and Printer Status Monitor cannot be used on an IPv6-only
network.
• For users of Mac OS 9.0 to 9.2.2/X10.2.8/X10.3.9
The CD-ROM does not include software for Mac OS 9.0 to
9.2.2/X10.2.8/X10.3.9.
Contact your dealer or nearest authorized service representative if you want
software.
• For users of Windows 2000/XP/Server 2003/Vista/Server 2008/7
To perform the procedures described in this manual such as installing the
software and configuring settings after installation, administrator authority is
required.
Operating
system
environment* 1
Software
Required
expansion kits
Type of
connection* 1
Windows PCL6 printer driver,
PCL5c printer driver
Can be used in
the standard
configuration.
Network/ USB
PS printer driver,
PPD driver
PC-Fax driver
Facsimile
expansion kit*
2
Scanner driver
Can be used in
the standard
configuration.
Network only* 3
(cannot be used
with a USB
connection) Printer Status
Monitor
Macintosh Macintosh PPD file
mxc402_us_sta.fm Page 27 Thursday, June 17, 2010 11:20 AM