Sharp TINSE4796FCZZ - Manual (Page 45)

42
SPECIFICATIONS
Machine specifications / copier specifications
(Continued)
* Type A connectors are located on the front and back right of the machine (two
connectors).
Continuous copying speeds*
* Copy speed during output of the second copy and following copies when performing
continuous one-sided copying of the same page (excluding offset output) using plain
one-sided paper from a tray other than the bypass tray.
Interface port
LAN connectivity: 10Base-T / 100Base-TX /
1000Base-T
USB connectivity: Type A connector supports USB 2.0
(Hi speed)*
Compatibility requirements of USB 2.0
Disk Format: FAT
Type B connector supports USB 2.0
(Hi speed)
Required power supply AC 120 V ±10% 60 Hz
Power consumption 1.44 kW
Dimensions
22-3/64" (W) x 19-29/64" (D) x 31-1/16" (H)
(560 mm (W) x 494 mm (D) x 789 mm (H))
Weight Approx. 116.8 lbs. (53 k g )
Overall dimensions
43-11/32" (W) x 19-29/64" (D) (1101 mm (W) x 494 mm
(D)) (when bypass tray is extended)
Copy ratio 100% / Reduced / Enlarged
Copy mode Color B/W
8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13"
32 copies/min. 32 copies/min.
A4 38 copies/min. 38 copies/min.
8-1/2" x 11", 7-1/4" x 10-1/2",
5-1/2" x 8-1/2", B5, A5, 16K
40 copies/min. 40 copies/min.
mxc402_us_sta.fm Page 42 Thursday, June 17, 2010 11:20 AM